Nature as a model: put an end to the eternal fight against moisture
aerodurit® SPECIALISED to prevent and eliminate serious problems caused by moisture of all kinds. Our mineral building materials use the physical laws of nature and are highly breathable and non-hydrophobic.
aerodurit® restoration plasters as a system solution
As the saying goes: »If you buy cheap, you buy twice«. Examples of this can be found in projects that exceed all budgets or refurbishments that are reworked after a short time. Professional, sustainable solutions do not have to be expensive or complex. aerodurit® special building materials are increasingly used where conventional systems fail. Don’t save money in the wrong place and insist on aerodurit® for new buildings and renovations, because we have been creating “building materials for generations” since 1950.
Blocking out moisture?
Those involved in renovation or refurbishment always come up against the question: How do I deal with moisture? It is considered the number one danger for masonry, as it causes the constant destruction of the building fabric. There is the threat of losing the natural thermal insulation as well as health hazards from mould etc. Locking out moisture is the common approach.
No stuffy air thanks to breathable building materials
Many old and new buildings show damage due to moisture and mould. New buildings are packed almost airtight so the removal of building moisture and excess moisture is becoming increasingly difficult. Diffusible and capillary-active building materials ensure that your home can also breathe.
Use aerodurit® special building materials as a preventive system or cost-effective solution for the renovation of existing buildings. Our products show their full potential in the area of moisture. For sustainable wall dehumidification even in difficult areas, e.g. cellars, storerooms, tunnels, city walls, etc.
aerodurit® SPECIALISED Category Catalogue
Download now and read offline (link opens PDF)
aerodurit® EP2010
Lime-Cement Micropore Specialised Restoration Plaster
Our bestseller. Mineral, non-hydrophobic renovating plaster (active dehumidifying) for permanent problem solution in the case of moisture and mould. High salt resistance, water repellent and very resistant to freeze-thaw changes. High daily output due to the elimination of downtimes and homogeneous plaster structure.
aerodurit® ZEP2040
Cement Micropore Specialised Restoration Plaster
The big brother of aerodurit® EP2010 - the perfect team when the going gets tough. Mineral, non-hydrophobic dehumidifying plaster for drying walls and as a preventive measure in damp areas. High impact resistance and salt resistance make it the ideal hardwall plaster (footing plaster).
aerodurit® BASIC
Lime-Cement Moisture Control Plaster
The best option! Economical addition to aerodurit® EP2010 and ZEP2040 to close remaining areas above the moisture zone or as high-quality exterior plaster (facade plaster). Also ideal for interior rooms with high humidity. Not suitable as dehumidifying plaster.
aerodurit® AURORA
Lime-Cement Thermal Insulation Restoration Plaster
It is time for a return to natural building materials. Our highly breathable wall insulation plaster (WLG 055) is our answer to the trend towards »sealing off« against nature and the environment. Experience thermal insulation without biocides and polystyrene.
aerodurit® EBM08
Lime-Cement Embedding and Reinforcement Mortar
System-compatible, mineral embedding mortar and reinforcement mortar protects your precious aerodurit® AURORA thermal insulation plaster with a strong, high-diffusivity surface.
aerodurit® FP2015
Lime-Cement Specialised Fine Finishing Plaster
System-compatible, mineral fine plaster for aerodurit® SPECIALISED plasters to create extremely fine surface structures. With a grading curve of selected limestone sand (0–0.8 mm) and high-quality cement. Highly breathable and very smooth to work with.
aerodurit® SBS1065
Lime-Cement Specialised High-Grade Plaster
System-compatible, mineral high-grade plaster for aerodurit® SPECIALISED plasters to create high-quality plaster surfaces structures. Grain size 0-1.5 mm. aerodurit® SBS1065 finish plaster is very smooth to apply and highly diffusive. Standard colour white, tinting at the factory is possible on request.
aerodurit® SSP1070
Lime-Cement Specialised Finishing Plaster
System-compatible, coarse-grained, mineral high-grade plaster for aerodurit® SPECIALISED plasters to product high-quality plaster surface structures. Grain size 3 mm. aerodurit® SSP1070 multi finish plaster can be applied very smoothly and is suitable for ETIC systems as a high diffusivity final coating.
aerodurit®
SOLAMENT CLIMATE
Silicate Paint Interior And Exterior
System-compatible, mineral, solvent-free silicate paints based on high-quality silicates. High diffusivity combined with thermal insulation and regulation. Our insulation paint is also available with silver particles to fight existing mould infestation.
aerodurit®
SOLAMENT REFLECT
Acrylic Paint Interior And Exterior
Acrylic paints without any plasticizers and with a strong heat-reflecting effect through thermo-pigmentation outdoors and thermo-insulating and regulating properties indoors. Our acrylic paint is very smooth and has good coating properties.
Plaster properties overview
| Advantages | EP2010 | ZEP2040 | BASIC | FP2015 | SBS1065 | SSP1070 |
| Active capillary dehumidification |  |
|
 |
|
|
|
| Regulates the micro-climate in damp rooms | |
|
|
|
|
|
| High diffusivity / non-hydrophobic | |
|
|
|
|
|
| Anti-mould effect / resistant to chemical influences | |
|
|
|
|
|
| Natural, biological, sustainable | |
|
|
|
|
|
| Weatherproof, resistant to frost and dew | |
|
|
|
|
|
| Water-repellent, non-flammable | |
|
|
|
|
|
| Heat-insulating, sound-absorbing | |
|
|
|
|
|
| High impact resistance | |
|
|
|
|
|
| Processing | EP2010 | ZEP2040 | BASIC | FP2015 | SSP1070 | SBS1065 |
| Machine processing | |
|
|
|
|
|
| Manual processing | |
|
|
|
|
|
| High daily output | |
|
|
|
|
|
| No standing time between individual layers | |
|
|
|
|
|
| No plaster base, no sealing slurries required | |
|
|
|
|
|
| Very smooth | |
|
|
|
|
|
| Types of application | EP2010 | ZEP2040 | BASIC | FP2015 | SBS1065 | SSP1070 |
| Interior plaster / exterior plaster | |
|
|
|
|
|
| Finishing plaster | |
|
|
|
|
|
| Finishing coat | |
|
|
|
|
|
| High-quality finish plaster | |
|
|
|
|
|
| Footing plaster | |
|
|
|
|
|
| Remaining areas above moisture zone up to the full height of the room | |
|
|
|
|
|
| Splatter-Dash / Roughcast | |
|
|
|
|
|
| Levelling mortar | |
|
|
|
|
|
| Plaster profile mortar | |
|
|
|
|
|
| Fields of application | EP2010 | ZEP2040 | BASIC | FP2015 | SBS1065 | SSP1070 |
| Old and new buildings | |
|
|
|
|
|
| Object-related for listed buildings | |
|
|
|
|
|
| Rapid dehumidification after floods | |
|
|
|
|
|
| Preventive protection in floodwater areas | |
|
|
|
|
|
| Quick-drying of the facade even after heavy rain | |
|
|
|
|
|
| Suitable for perimeter areas | |
|
|
|
|
|
| Suitable for pressurised water in a hardened condition | |
|
|
|
|
|
| Plaster for stables | |
|
|
|
|
|
| Heavy masonry (brick, concrete, lime, natural, mixed masonry) | |
|
|
|
|
|
| Lightweight masonry (expanded clay pumice stone, cellular concrete, lightweight perforated brick) | |
|
|
|
|
|
Main characteristics
Applies
Does not apply
